Kwinkqubo yokutshintsha i-hydraulic breaker kunye nebhakethi, ngenxa yokuba umbhobho we-hydraulic ungcoliseka lula, kufuneka udityaniswe kwaye ufakwe ngokweendlela ezilandelayo.
1. Hambisa i-excavator kwindawo ethafeni engenalo udaka, uthuli nenkunkuma, cima injini, kwaye ukhulule uxinzelelo kumbhobho osebenza ngoxinzelelo lwendalo kunye nerhasi ekwitanki yamafutha.
2. Jikelezisa ivalve yokuvala efakwe ekupheleni kwe-boom 90 degrees ukuya kwindawo OFF ukukhusela ioli ye-hydraulic ukuba ingaphumi.
3. Khulula i-hose plug kwi-boom ye-breaker, kwaye emva koko udibanise inani elincinci leoli ye-hydraulic ephumela ngaphandle kwi-container.
4. Ukuthintela udaka nothuli ekungeneni kumbhobho weoyile, vala umbhobho ngeplagi uze uplage umbhobho ngeplagi yangaphakathi yomsonto. Ukuthintela ukungcoliseka ngothuli, bopha imibhobho yoxinzelelo oluphezulu kunye noxinzelelo oluphantsi ngeengcingo zentsimbi.
--Iplagi yeHose. Xa ixhotyiswe ngokusebenza kwebhakethi, iplagi kukuthintela udaka kunye nothuli kwi-breaker ukungena kwi-hose.
6. I-hydraulic rock breaker ayiyi kusetyenziswa ixesha elide, nceda ucofe indlela yokuyigcina
1) Coca umphandle we-hydraulic deolition breaker;
2) Emva kokususa i-drill yensimbi kwigobolondo, sebenzisa ioli ye-anti-corrosion;
3) Ngaphambi kokutyhala i-piston kwigumbi le-nitrogen, i-nitrogen kwigumbi le-nitrogen kufuneka ithunyelwe;
I-4) Xa udibanisa kwakhona, gcoba iindawo kwi-breaker ngaphambi kokuba uhlanganise.
Ixesha lokuposa: May-17-2021