Hydraulic Pilverizer shear are installed on the excavator, powered by the excavator, so that the movable jaw and the fixed jaw of the hydraulic crushing tongs are combined together to achieve the effect of crushing concrete, and the steel bars in the concrete can be recycled and reused. Excavator hydraulic crushing tongs are composed of a tong body, a hydraulic cylinder, a movable jaw and a fixed jaw. The external hydraulic system provides oil pressure for the hydraulic cylinder, so that the movable jaw and the fixed jaw can be combined to achieve the effect of crushing objects. The steel bar can be cut, and a rotating device can be installed, which can be rotated at full angles, and the operation is more convenient.
The installation and operation of Hydraulic Pilverizer shear of the excavator:
1. Connect the pin hole of the hydraulic crusher with the pin hole of the front end of the excavator;
2. Connect the pipeline on the excavator with the hydraulic pulverizer;
3. After installation, the concrete block can be crushed
The characteristics of hydraulic crushing tongs
The hydraulic crusher of the excavator is the same as the breaker. It is installed on the excavator and uses a separate pipeline. In addition to crushing the concrete, it can also replace the manual trimming and packing of steel bars, which further releases labor.
1. Versatility: the power comes from various brands and models of excavators, which truly realize the versatility and economy of the product;
2. Safety: construction workers do not touch the crushing construction, adapt to the requirements of safe construction in complex terrain;
3. Environmental protection: The full hydraulic drive realizes low noise operation, does not affect the surrounding environment during construction, and meets the domestic mute standard;
4. Low cost: simple and convenient operation, less staffing, reducing labor costs, machine maintenance and other construction costs;
5. Convenience: convenient transportation; convenient installation, just connect the hammer pipeline;
6. Long life: using special steel, high toughness, high wear resistance, wear-resistant steel plate is used for crushing, welding wear-resistant welding pattern, durable, reliable, and long service life.
7. Large power: Install hydraulic acceleration valve, large hydraulic cylinder design, the cylinder power is greater, the crushing and shearing force is greater;
8. High efficiency: When demolishing, the front end crushes the cement and the rear end cuts the steel bars, so the demolishing efficiency is high.
Post time: Jun-19-2021